|
Now
is the time to become your own Power Producer.
We can help with all of your power system needs.
Exeltech
Sine Wave N+1 Redundant Inverters 
The
Exeltech MX series inverters are a true sine wave, very
versatile, custom inverter designed for use where reliability is
extremely important. MX systems can be configured with power
levels from 1000 Watts to 20KW at 120Vac output, 40KW at 240Vac
bi-phase, or 60KW at 208Vac 3 phase. Power levels are
expandable, and inverter modules can be upgraded or replaced,
and if designed as a redundant system, replacement can occur
while the system is on line without interruption in power to
your loads. The output voltage is precisely regulated,
such that no measurable voltage change occurs on the output when
the input voltage changes over its wide voltage
range. Less than 0.5 volt change in output voltage
will occur when the output load varies from 0 to 100% of rated
power. With distortion of 2% maximum offers the cleanest
sine wave power available. They system is extremely
compact and lightweight. Modules, cards and cages are
combined to create the inverter needed. MX inverters are available
with 12, 24, 36, 48, 96, 108 and 120 VDC input voltage.
A Master
Module combines the control signals of a Control Card with a
Power Module. This is a space saving solution when redundancy
is not necessary. The Master Module provides control
signals to up to 19 power modules.
The
Power Module is a 1000 watt slave power inverter.
It requires drive signals from a Master Module or Control
Card. This module is the backbone of the inverter system
and will be the majority of the modules in most systems.
The
Control Card provides all the control functions for the
Power Modules. Adding a second Control Card provides
redundant operation as only one Control Card is required to
operate the system.
The
Alarm Card is necessary in a redundant system. It
allows the inverter to detect a control card failure and switch
to the backup Control Card. The Alarm Card provides LED
indicators for DC On, inverter on, load presence, inverter fail,
breaker open, high temperature, and low voltage and
"form-C" contact closures for minor failure, major
failure, inverter failure, bypass, DC failure, and AC failure.
The
Transfer Switch allows the inverter to automatically
switch between inverter power and a secondary source of AC
power. The Transfer Switch has a maximum capacity of
50Amps and a typical transfer time of 4ms.
Determine
the approximate price by adding the cost of the components
needed from the chart below. For 120/240V operation, use
twice as many Master Modules or Control Cards and Cages.
For 3-Phase use 3 times as many Master Modules or Control Cards
and Cages.
Exeltech
MX inverts will be factory assembled to your
specifications. To order an MX inverter please call us
with the following information; battery voltage, output voltage
required, number of phases, output wattage, redundancy
requirement, transfer switch requirement and cage size and we
will give you a final quote.
Exeltech
XP Series Sine Wave Inverters
  
Exeltech
XP inverters are the most affordable, high-performance true sine
wave inverters on the market. They feature sophisticated
protection circuitry, making them immune from damage by
overloads, short circuits, over temperature and input polarity
reversal. XP series are excellent for telecommunications,
audio recording equipment, or any loads that require an
excellent waveform. Efficiency = 87-89% (distortion
<2%). XP inverters can run on the high charging
voltages needed to charge alkaline batteries. 120 VAC
output. 1-year warranty.
NOTE: XP 600 SERIES does not have pricing listed
above. Please call us for prices and availability at
1-800-854-7191
|
